conventions

Year-End Tax Planning for Businesses

There are a number of end of year tax strategies businesses can use to reduce their tax burden for 2012. Here’s the lowdown on some of the best options.

Purchase New Business Equipment

Section 179 Expensing. Business should take advantage of Section 179 expensing this year for a couple of reasons. First, is that in 2012 businesses can elect to expense (deduct immediately) the entire cost of most new equipment up to a maximum of $139,000 for property placed in service by December 31, 2012. The maximum threshold amount for capital purchases in 2012 is $560,000, but in 2013, that amount drops to $25,000. Also in 2012, businesses can take advantage of an accelerated first year bonus depreciation of 50% of the purchase price of new equipment and software placed in service by December 31, 2012 that exceeds the threshold amount of $560,000. This bonus depreciation is phased out in 2013.

Qualified property is defined as property that you placed in service during the tax year and used predominantly (more than 50 percent) in your trade or business. Property that is placed in service and then disposed of in that same tax year does not qualify, nor does property converted to personal use in the same tax year it is acquired.

Note: Many states have not matched these amounts and, therefore, state tax may not allow for the maximum federal deduction. In this case, two sets of depreciation records will be needed to track the federal and state tax impact.

Please contact our office if you have any questions regarding qualified property and bonus depreciation.

Timing. If you plan to purchase business equipment this year, consider the timing. You might be able to increase your tax benefit if you buy equipment at the right time. Here’s a simplified explanation:

Conventions. The tax rules for depreciation include “conventions” or rules for figuring out how many months of depreciation you can claim. There are three types of conventions. To select the correct convention, you must know the type of property and when you placed the property in service.

    1. The half-year convention: This convention applies to all property except residential rental property, nonresidential real property, and railroad gradings and tunnel bores (see mid-month convention below) unless the mid-quarter convention applies. All property that you begin using during the year is treated as “placed in service” (or “disposed of”) at the midpoint of the year. This means that no matter when you begin using (or dispose of) the property, you treat it as if you began using it in the middle of the year.

Example: You buy a $40,000 piece of machinery on December 15. If the half-year convention applies, you get one-half year of depreciation on that machine.

    1. The mid-quarter convention: The mid-quarter convention must be used if the cost of equipment placed in service during the last three months of the tax year is more than 40% of the total cost of all property placed in service for the entire year. If the mid-quarter convention applies, the half-year rule does not apply, and you treat all equipment placed in service during the year as if it were placed in service at the midpoint of the quarter in which you began using it.
    2. The mid-month convention: This convention applies only to residential rental property, nonresidential real property, and railroad gradings and tunnel bores. It treats all property placed in service (or disposed of) during any month as placed in service (or disposed of) on the midpoint of that month.

If you’re planning on buying equipment for your business, call us first. We’ll help you figure out the best time to buy it to take full advantage of these tax rules.

Other Year-End Moves To Take Advantage Of

Partnership or S Corporation Basis. Partners or S corporation shareholders in entities that have a loss for 2012 can deduct that loss only up to their basis in the entity. However, they can take steps to increase their basis to allow a larger deduction. Basis in the entity can be increased by lending the entity money or making a capital contribution by the end of the entity’s tax year.

Caution: Remember that by increasing basis, you’re putting more of your funds at risk. Consider whether the loss signals further troubles ahead.

Retirement Plans. Self-employed individuals who have not yet done so should set up self-employed retirement plans before the end of 2012. Call us today if you need help setting up a retirement plan.

Dividend Planning. Reduce accumulated corporate profits and earnings by issuing corporate dividends to shareholders, which continue to be taxed at the 15 percent rate through 2012.

Budgets. Every business, whether small or large should have a budget. The need for a business budget may seem obvious, but many companies overlook this critical business planning tool.

A budget is extremely effective in making sure your business has adequate cash flow and in ensuring financial success. Once the budget has been created, then monthly actual revenue amounts can be compared to monthly budgeted amounts. If actual revenues fall short of budgeted revenues, expenses must generally be cut.

Tip: Year-end is the best time for business owners to meet with their accountants to budget revenues and expenses for the following year.

For more on this topic, see the article below about common budgeting errors, but if you need help developing a budget for your business don’t hesitate to call us today.

Call Us First

These are just a few of the year-end planning tax moves that could make a substantial difference in your tax bill for 2012. But the best advice we can give you is to give us a call. We’ll sit down with you, discuss your specific tax and financial needs, and develop a plan that works for your business.

Year-End Tax Planning for Businesses

There are a number of end of year tax strategies businesses can use to reduce their tax burden for 2011. Here’s the lowdown on some of the best options.

Purchase New Business Equipment

Section 179 Expensing. Business should take advantage of Section 179 expensing this year for a couple of reasons. First, is that starting in tax year 2010 and continuing into tax year 2011, the maximum Section 179 expense deduction for equipment purchases increased to $500,000 ($535,000 for qualified enterprise zone property) and the bonus depreciation increased to 100% for qualified property. Beginning in tax year 2012 however, the Section 179 deduction is scheduled to drop to $125,000 and the bonus depreciation to be reduced to 50 percent and then be phased out completely.

In other words, in 2011 businesses can elect to expense (deduct immediately) the entire cost of most new equipment up to $500,000 (subject to a dollar-for-dollar reduction in that $500,000 for property placed in service that exceeds the maximum amount of $2,000,000).

Qualified property is defined as property that you placed in service during the tax year and used predominantly (more than 50 percent) in your trade or business. Property that is placed in service and then disposed of in that same tax year does not qualify, nor does property converted to personal use in the same tax year it is acquired.

Note: Many states have not matched these amounts and, therefore, state tax may not allow for the maximum federal deduction. In this case, two sets of depreciation records will be needed to track the federal and state tax impact.

Please contact our office if you have any questions regarding qualified property and bonus depreciation.

Timing. If you plan to purchase business equipment this year, consider the timing. You might be able to increase your tax benefit if you buy equipment at the right time. Here’s a simplified explanation:

Conventions. The tax rules for depreciation include “conventions” or rules for figuring out how many months of depreciation you can claim. There are three types of conventions. To select the correct convention, you must know the type of property and when you placed the property in service.

    1. The half-year convention: This convention applies to all property except residential rental property, nonresidential real property, and railroad gradings and tunnel bores (see mid-month convention below) unless the mid-quarter convention applies. All property that you begin using during the year is treated as “placed in service” (or “disposed of”) at the midpoint of the year. This means that no matter when you begin using (or dispose of) the property, you treat it as if you began using it in the middle of the year.

Example: You buy a $40,000 piece of machinery on December 15. If the half-year convention applies, you get one-half year of depreciation on that machine.

    1. The mid-quarter convention: The mid-quarter convention must be used if the cost of equipment placed in service during the last three months of the tax year is more than 40% of the total cost of all property placed in service for the entire year. If the mid-quarter convention applies, the half-year rule does not apply, and you treat all equipment placed in service during the year as if it were placed in service at the midpoint of the quarter in which you began using it.
    2. The mid-month convention: This convention applies only to residential rental property, nonresidential real property, and railroad gradings and tunnel bores. It treats all property placed in service (or disposed of) during any month as placed in service (or disposed of) on the midpoint of that month.

If you’re planning on buying equipment for your business, call us first. We’ll help you figure out the best time to buy it to take full advantage of these tax rules.

Other Year-End Moves To Take Advantage Of

Partnership or S Corporation Basis. Partners or S corporation shareholders in entities that have a loss for 2011 can deduct that loss only up to their basis in the entity. However, they can take steps to increase their basis to allow a larger deduction. Basis in the entity can be increased by lending the entity money or making a capital contribution by the end of the entity’s tax year.

Caution: Remember that by increasing basis, you’re putting more of your funds at risk. Consider whether the loss signals further troubles ahead.

Retirement Plans. Self-employed individuals who have not yet done so should set up self-employed retirement plans before the end of 2011. Call us today if you need help setting up a retirement plan.

Dividend Planning. Reduce accumulated corporate profits and earnings by issuing corporate dividends to shareholders, which continue to be taxed at the 15 percent rate through 2012.

Budgets. Every business, whether small or large should have a budget. The need for a business budget may seem obvious, but many companies overlook this critical business planning tool.

A budget is extremely effective in making sure your business has adequate cash flow and in ensuring financial success. Once the budget has been created, then monthly actual revenue amounts can be compared to monthly budgeted amounts. If actual revenues fall short of budgeted revenues, expenses must generally be cut.

Tip: Year-end is the best time for business owners to meet with their accountants to budget revenues and expenses for the following year.

For more on this topic, see the article below about common budgeting errors, but if you need help developing a budget for your business don’t hesitate to call us today.

Call Us First

These are just a few of the year-end planning tax moves that could make a substantial difference in your tax bill for 2011. But the best advice we can give you is to give us a call. We’ll sit down with you, discuss your specific tax and financial needs, and develop a plan that works for your business.

Classes or Types? When To Use Them in QuickBooks

QuickBooks’ standard reports are critical to understanding your company’s past, present, and future. But the program also offers innovative tools that can make them significantly more insightful and comprehensive.

QuickBooks offers two simple conventions that let you identify related data: classes and types. Classes are used in transactions. Types are assigned to individual customers, vendors, and jobs.

For example, you might use classes to separate transactions that relate to different departments, locations, or types of business. A construction company might want to track classes using New Construction, Remodel, and Overhead. Your customer types might help you isolate groups by characteristics like Industry or Geographical Location.

Creating Classes

First, make sure that QuickBooks is set up to use classes. Go to Edit | Preferences | Accounting | Company Preferences. Make sure that Use class tracking is checked. If you want to be prompted for a class designation in transactions, check that box, too. QuickBooks already contains a Type field in customer, vendor, and job records.

It’s easy to build lists of options for both. To define classes, go to Lists | Class List. In the bottom left corner of the screen, click on Class, then select New from the menu. You’ll see this:


Figure 1: To create a class, just give it a name and click OK

Let’s say that you’re a contractor and you want to separate remodeling jobs into room types, like Bathroom or Kitchen. Go through the above steps again. Enter “Bathroom” in the Class Name field and click the box next to Subclass of. Open the list and choose “Remodel.” Click OK.

Tip: If your class list grows lengthy and you want to tidy it up, you can make classes that you’re not currently using inactive by checking the box in this window. It will remain in your QuickBooks records and can be reactivated again.

Putting Classes to Work

Now you can use classes in transactions. Open a blank invoice and select a customer. The Class field will be next to the customer name. If the entire invoice will be assigned to the same class, click the drop-down list and select it. You can also assign separate classes to individual line items:


Figure 2: You can assign different classes to individual line items in transactions.

Not all invoice templates include a column for classes. You can add this by selecting the invoice form you want to modify and clicking Customize in the toolbar.

QuickBooks comes with two reports specially designed for tracking class-based transactions: Profit & Loss by Class and Balance Sheet by Class (both can be found in the Reports menu, under Company & Financial). Of course, you can filter other reports to include a class column. You can also create a QuickReport for individual classes. Go to Lists | Class List and select a report or graph.

Figure 3: You can filter by class in QuickBooks reports.

Warning!
The Balance Sheet by Class report is complicated and may produce unexpected results. Let your ProAdvisor help you work with this one. They can also help you set up a solid class structure.

A Simpler Assignment

Customer, vendor, and job types are a bit less complicated. Job types are especially useful; you can track, for example, profitability and time spent on individual projects. Customer and vendor types can produce output for things like targeted mailings and reports.

Creating types is very similar to creating classes. Go to Lists | Customer & Vendor Profile Lists, and select the type you want to work with. You’ll follow the same instructions here as you did for classes. Types do not appear on transactions; they’re designed for your own internal use, and they’re stored in records.


Figure 4: Customer, vendor, and job types are specified in their records.

Classes and types can be used very effectively in your bookkeeping, but they require a good deal of thought and planning upfront to get accurate, meaningful reports. Let your ProAdvisor know if he/she can assist as you attempt to use these powerful forms of classification.

Scroll to top